User Manual

10
WPA2-PSK: WPA-PSK2 (Wi-Fi Protected Access pre-shared key) is a simpler
version that does not support 802.1x and requires a separate RADIUS server for
mutual authentication.
Enter a Passphrase in the WPA2-PSK dialog box. This Passphrase must be the
same on each computer that is connected to the wireless network.
It is recommended to select “Auto” if you are not familiar with the setting.
 Encryption Mode:
There are two kinds of encryption mode, WEP encryption and WPA-
Passphrase..
Click the Enable Encryption to activate the security of the USB Adapter.
WEP-Key: WEP (Wired Equivalent Privacy) relies on a secret key that is
shared between a mobile station and a base station (Access Point).
WEP-Passphrase: the Passphrase in the dialog box helps you to create a group
of WEP key in the Key Setting.
 Default Key (Key 1 ~ Key 4):
You can type the key that you want to use from Key#1 to Key #4, and the key
that you type will be the encryption between the stations that you connected
with.