User Manual

Security: the setting of the Network Encryption.

This function is used to protect wireless communication from eavesdropping. A

secondary function of encryption is to prevent unauthorized access to a wireless

network, and it can be achieved by using the Encryption function.

 Enable Encryption: Enable or Disable the WLAN encryption on the WLAN

USB Adapter.

 Authentication Mode:

Auto: Will automatically adjust to the Authentication mode of the WLAN USB

Adapter.

Open System: with the same WEP key between the stations, the stations don’t

need to be authenticated, and this algorithm was set to default.

Shared Key: with the same WEP key between the stations in this

Authentication algorithm, this type will use packets with encryption by

transferring a challenge text which will be acknowledge by both side of the

stations. In order to choose which authentication algorithm will be used, you

must know which one the station supports this algorithm first.

WPA: WPA (Wi-Fi Protected Access) security is selected, configuration is

enabled. Please click the

“Certificate” button. The below window is pop up.

Then, please select the certificate that user wants to use and enter the server

name and login name.