User's Manual

32
2-4-1 WLAN Setting
Ø SSID: The SSID differentiates one WLAN group name from
another; so all access points and all devices attempting to connect to
a specific WLAN group name must use the same SSID. A device
will not be permitted to join the BSS unless it can provide the unique
SSID.
Ø Country: this is the channel selection of each country regulatory
domain, select the country where you are using this Wireless
Broadband Router, users are responsible for ensuring that the
channel set configuration is in compliance with the regulatory
standards of these countries. The default setting of this Wireless
Broadband Router is following the FCC rules using Channel 1~11.
Warning: Be noted that selecting the incorrect region may result
in a violation of applicable law; you will need to select the correct
domain.
Ø DS Channel: It shows radio channel numbers that used for
WLAN networking.
WEP Key Setting
While enabling the WEP Key Setting, the security of the Wireless
Broadband Router will be activated, it will prevent unauthorized
access to a wireless network.
Ø WEP Key Type: selection of WEP key format using HEX type
(hexadecimal 0~F) or ASCII type (alphanumeric 0~9, A~Z and a~z).
Ø 64 bit Encryption: when you select 64 bit encryption using HEX
mode, you must type 10 values in the following range (0~F,
hexadecimal) in key 1 to key 4, or 64bit in ASCII format, you must
type 5 values in the following range (0~9, A~Z and a~z
Alphanumeric ).