User's Manual

1-3-1 Dynamic IP (Cable modem)

To connect a cable modem with the Broadband Router, check the cable

modem with the related user’s guide, then the Cable modem will

automatically configure itself, the Broadband Router is configured to

automatically assign addresses to each PC.

Fill up the MAC Address of the network adapter when the DNS server

need a certain address with the network adapter, or press the “Clone MAC

Address” button to get the manager’s PC MAC Address.

1-3-2 Fixed IP

If the Internet Service Providers assign a fixed IP address, choose this

option and enter the assigned IP address, subnet mask, gateway IP and

DNS IP addresses for your Broadband Router.

1-3-3 PPPoE (Dial-up xDSL)

If connected to the Internet using a PPPoE (Dial-up xDSL) Modem, the

ISP will provide a Password and User Name, then the ISP uses PPPoE.

Choose this option and enter the required information, if the ISP provided

a Service Name, enter it in the column of the Service Name field,

otherwise, leave it blank.

The dialog box in Service Name, IP Address and DNS Address must be

filled up when the ISP Provider provide these information to you, if the

ISP Provider provides Dynamic IP Address, then you can skip on these

dialog box.