User's Manual

24
Restore Configuration Settings: Click on the “Browse” button to open a
FileOpen Dialog box, where user gets to select the file, which saves previous
settings and configurations. Upon selecting the saved file, click “Upload” and
complete the restore process when the access point re-operates after it restarts.
Factory default settings: Click on “Restore” button to restore the access point
back to its manufacture default settings.
Firmware Upgrade: Click on the “Browse” button to open a FileOpen Dialog box,
where gets to select the firmware file, which download from the web for the latest
version. Upon selecting the firmware file, click “Upload” and complete the
firmware upgrade process when the Access Point re-operates after it restarts.
Wi-Fi Protected Setup
Wi-Fi Protected Setup: Enable or Disable the WPS (Wi-Fi Protected Setup)
function
Status: Display the state (Un-configured State/Configured State) information of
WPS.
Self-PIN Number: Display the default PIN number of WLAN Router.
Client PIN Number: Type Client PIN number the client uses to negotiate with
WLAN Router via WPS protocol. It is only used when users want their station to
join Router's network.
Push Button Configuration: Clicking the Start PBC button will invoke the Push
Button Configuration (PBC) method of WPS. It is only used when WLAN Router
acts as a Registrar.
SNMP: Enable or Disable the SNMP function.