User Manual

Professional Access Point
Administrator Guide
Class Structure, Commands, and Examples - 202
Set the Broadcast SSID (Allow or Prohibit)
To set the Broadcast SSID to on (allow):
USR5453-AP# set bss wlan0bssInternal ignore-broadcast-ssid on
To set the Broadcast SSID to off (prohibit):
USR5453-AP# set bss wlan0bssInternal ignore-broadcast-ssid off
Enable / Disable Station Isolation
USR5453-AP# get radio wlan0 station-isolation
off
USR5453-AP# set radio wlan0 station-isolation off
USR5453-AP# get radio wlan0 detail
Field Value
---------------------------------------------------------------
status up
description Radio 1 - IEEE 802.11g
mac
max-bss 4
channel-policy static
mode g
static-channel 6
channel 6
tx-power 100
tx-rx-status up
beacon-interval 100
rts-threshold 2347
fragmentation-threshold 2346
load-balance-disassociation-utilization 0
load-balance-disassociation-stations 0
load-balance-no-association-utilization 0
ap-detection off
station-isolation off
frequency 2437
wme on
Set Security to None
USR5453-AP# set interface wlan0 security none
Set Security to Static WEP
1. Set the Security Mode
2. Set the Transfer Key Index
3. Set the Key Length
4. Set the Key Type
5. Set the WEP Keys
6. Set the Authentication Algorithm
7. Get Current Security Settings After Re-Configuring to Static WEP Security Mode