User Manual

Professional Access Point
Administrator Guide
Class Structure, Commands, and Examples - 189
Get All Radio Settings on the Internal Interface
USR5453-AP# get radio wlan0 detail
Field Value
----------------------------------------------------
status up
description IEEE 802.11
mac
max-bss 2
channel-policy best
mode g
static-channel 11
channel 2
tx-power 100
tx-rx-status up
beacon-interval 100
rts-threshold 2347
fragmentation-threshold 2346
load-balance-disassociation-utilization 0
load-balance-disassociation-stations 0
load-balance-no-association-utilization 0
ap-detection on
station-isolation off
frequency 2417
wme on
Get Status on Events
USR5453-AP# get log-entry all
Number Time Priority Daemon
Message
------------------------------------------------------
1 Apr 20 21:39:55 debug udhcpc
Sending renew...
2 Apr 20 21:39:55 info udhcpc
Lease of 10.10.55.216 obtained, lease time 300
3 Apr 20 21:37:25 debug udhcpc
Sending renew...
4 Apr 20 21:37:25 info udhcpc
Lease of 10.10.55.216 obtained, lease time 300
5 Apr 20 21:34:55 debug udhcpc
Sending renew...
6 Apr 20 21:34:55 info udhcpc
Lease of 10.10.55.216 obtained, lease time 300
Enable Remote Logging and Specify the Log Relay Host for the Kernel Log
The Kernel Log is a comprehensive list of system even its and kernel messages such as error conditions
like dropping frames. To capture Access Point Kernel Log messages you need access to a remote syslog
server on the network. The following sections describe how to set up remote logging for the access point.
1. Prerequisites for Remote Logging
2. View Log Settings
3. Enable / Disable Log Relay Host