User Manual

Professional Access Point
Administrator Guide
Ethernet (Wired) Settings - 79
Advanced
Advanced Settings include the following:
• “Ethernet (Wired) Settings” on page 79
• “Wireless Settings” on page 87
• “Security” on page 91
• “Guest Login” on page 111
• “Virtual Wireless Networks” on page 115
• “Radio” on page 119
• “MAC Filtering” on page 125
• “Load Balancing” on page 129
• “Quality of Service” on page 133
• “Wireless Distribution System” on page 143
• “Time Protocol” on page 151
• “SNMP” on page 155
• “Reboot” on page 159
• “Reset Configuration” on page 159
• “Upgrade” on page 160
• “Backup/Restore” on page 162
Ethernet (Wired) Settings
Ethernet (Wired) Settings describe the configuration of your Ethernet local area network (LAN).
The following sections describe how to configure the wired address and related settings on the
Professional Access Point:
Note
The Ethernet settings, including guest access, are not shared across the cluster. These settings must
be configured individually on the Administration pages for each access point. To get to the Administra-
tion pages for an access point that is a member of the current cluster, click its IP Address link on the
Cluster menu’s Access Points page of the current access point. For more information about which set-
tings are shared by the cluster and which are not, see “Which Settings are Shared as Part of the Clus-
ter Configuration and Which Are Not?” on page 35.