User Manual

Professional Access Point
Administrator Guide
Pre-Launch Checklist: Default Settings and Supported Administrator/Client Platforms - 11
Interface Ethernet Settings” on page 83.)
Recovering an IP Address
If you experience trouble communicating with the access point, you can recover a Static IP Address by
resetting the access point configuration to the factory defaults (see “Reset Configuration” on page 159), or
you can get a dynamically assigned address by connecting the access point to a network that has DHCP.
Caution
If you do not have a DHCP server on the Internal network and do not plan to use one, the first thing
you must do after bringing up the access point is change the Connection Type from DHCP to
Static IP. You can either assign a new Static IP address to the access point or continue using the
default address. USRobotics recommends assigning a new Static IP address so that if later you
bring up another Professional Access Point on the same network, the IP address for each access
point will be unique.