User's Manual

23L7 Networks L7-N-R2000 User Manual
Section 3 - Conguration
Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all the
wireless functions.
Indicates the channel setting for the L7-N-R2000. By default
the channel is set to 6. The Channel can be changed to
t the channel setting for an existing wireless network or
to customize the wireless network. The Auto Channel
Selection setting can be selected to allow the L7-N-R2000
to choose the channel with the least amount of interference.
Use the drop-down menu to select the appropriate
Transmission Rate in Mbits per second. Many users will
want to use the default setting, Best (automatic).
Service Set Identier (SSID) is the name of your wireless
network. Once created and enabled a name in Multiple
Wireless Network Name (SSIDs) window, you may select
fromthe drop-down menu.
Check this option if you would not like the SSID of your
wireless network to be broadcasted by the L7-N-R2000.
If this option is checked, the SSID of the L7-N-R2000 will
not be seen by Site Survey utilities so your wireless clients
will have to know the SSID of your L7-N-R2000 in order
to connect to it.
Enable Wireless
Channel:
Wireless
Network Name:
Transmission
Rate:
Enable
Wireless:
Visibility
Status: