User's Manual

802.1x Authentication: Checked to enable the 802.1x authentication. This

option is selectable only when the “Encryption” is selected to either None or WEP.

If the “Encryption” is WEP, you need to further select the WEP key length to be

either WEP 64bits or WEP 128bits.

WEP: Click the “Set WEP Key” button to setting WEP key when the

“Encryption” is selected to “WEP”.

SSID TYPE: The WLAN ADSL Router supports up to four multiple SSID

feature (Multiple Virtual AP), select which AP (Root AP, VAP0~VAP3) will

setting the WEP key.

Key Length: Select the level of encryption from the drop-down list 64 and 128-

bit encryption.

Key Format: Select the key format from the drop-down list HEX or ASCII.

Default TX Key: Select which encryption key 1~4 will be use to default TX

key.

Encryption Key 1 ~ 4: Enables users to create up to 4 different WEP keys,

manually enter a set of values for each key.

WPA Authentication Mode: There are 2 types of authentication mode for

WPA.

Enterprise (RADIUS): WPA RADIUS uses an external RADIUS server to

perform user authentication. To use WPA RADIUS, enter the IP address of the

RADIUS server, the RADIUS port (default is 1812) and the shared secret from

the RADIUS server. Please refer to “Authentication RADIUS Server” setting

below for RADIUS setting.

Personal (Pre-Shared Key): Pre-Shared Key authentication is based on a

shared secret that is known only by the parties involved. To use WPA Pre-

Shared Key, select key format and enter a password in the “Pre-Shared Key

Format” and “Pre-Shared Key” setting respectively. Please refer to “Pre-

Shared Key Format” and “Pre-Shared Key” setting below.