User's Manual

Associated Clients: Click the “Show Active Client” button displays the

information of connected wireless clients.

Security

SSID TYPE: The WLAN ADSL Router supports up to four multiple SSID feature

(Multiple Virtual AP), select which AP (Root AP, VAP0~VAP3) will configure the

security setting.

Encryption: There are 4 types of security to be selected. To secure your WLAN,

it’s strongly recommended to enable this feature.

WEP: Make sure that all wireless devices on your network are using the same

encryption level and key. Click Set WEP Key button to set the encryption key.

WPA (TKIP): WPA uses Temporal Key Integrity Protocol (TKIP) for data

encryption. TKIP utilized a stronger encryption method and incorporates Message

Integrity Code (MIC) to provide protection against hackers.

WPA2 (AES): WPA2, also known as 802.11i, uses Advanced Encryption

Standard (AES) for data encryption. AES utilized a symmetric 128-bit block data

encryption.

WAP2 Mixed: The AP supports WPA (TKIP) and WPA2 (AES) for data

encryption. The actual selection of the encryption methods will depend on the

clients.