User's Manual Part 2

49
Subnet Mask: The network mask of the destination subnet. The default gateway
uses a mask of 0.0.0.0.
Next Hop: The IP address of the next hop through which traffic will flow towards
the destination subnet.
Metric: Defines the number of hops between network nodes that data packets
travel. The default value is 0, which means that the subnet is directly one hop away
on the local LAN network.
Interface: The WAN interface to which a static routing subnet is to be applied.
Add Router: Click the “Add Router” button to add a user-defined destination route.
Update: Click the “Update” button to modify the selected rule form the Static
Route Table.
Show Routes: Click the “Show Routes” to display the routing table of the WLAN
ADSL Router.