Specifications

ZL55 ZL55E
FUS. MOTORE 8A
21
FUS.
ACC. 3,15A
FUS. CENTR. 630mA
CH1
APRE
AP / CH
AF
ZL55 ZL55E
FUS. MOTORE 8A
21
A
FUS. CENTR. 630mA
CH1
APRE
AP / CH
AF
"CH1"
Flashing Led
Lit LED "AF" board
20
PERIODIC MAINTENANCE
CODE STORAGE
Keep the CH1 key pressed on the base card (the signal LED will flash), and with a key on the
transmitter the code is sent, the LED will remain lit to signal the successful saving of the code.
CH1 = Channel for direct control of one function performed by the control unit on the gear motor
("open only" / "open-close-reverse" or "open-stop-close-stop", depending on the position of dip
switches 2 and 3, 10-dip function switch).
N.B. If you wish to change the code on your transmitters in the future, simply repeat the procedure
described above.
PERIODIC MAINTENANCE
The unit does not require specific maintenance. However, it is a good idea to periodically oil the sliding
wheels and the pins of the door arms, and to check the belt or chain’s tension.