Instruction Manual

5
ENGLISH
The data and information shown in this manual may be changed by CAME cancelli automatici s.p.a. at any time without prior warning.
5.5 Mounting
- secure the base plate to the pillar using ø8 screws and ø14 moulded inserts making sure the minimum distance of 150mm
from the ground is met.
- Secure the A bracket (using ø8 screws or by welding) to the gate leaf making sure the 450mm and 19mm distances mea-
surements and are met.
Pillar
Bracket “A”
Ø 8 mm
Ø 8 mm
Ø 14 mm
Front view
150 mm
450 mm
19
M 8
M 8 x 110
- Insert the gearmotor into the base plate and secure it using the two supplied M8x110 screws and M8 nuts.