User guide

Lingua
Italiano
Þß
CANCELLI AUTOMATICI
R700
ACCESS CONTROL
TOP
TSP00 LT001
CA
M
E
TAM
ATOMO
TWIN
TOUCH
C
A
M
E
TFM
Memory roll
Pag.
25
25 -
Manual code
:
319U75
319U75
ver.
2.0
2.0
01/2009 © CAME cancelli automatici s.p.a. -
The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.
ENGLISH
Frequency/MHz Card Transmitter
FM 26.995 AF130 TFM
FM 30.900 AF150 TFM
AM 26.995 AF26 TOP
AM 30.900 AF30 TOP
AM 433.92 AF43S TAM / TOP
ATOMO / TWIN
AM 433.92 AF43TW TWIN
AM 40.685 AF40 TOUCH
AM 868.35 AF868 TOP
7.10 nfo Menu
< Version >
fw : 3.0
Version: to view software version.
Number of gate runs: to view the number of runs performed by the gate.
Starting Mssg: to view the starting message, confirm with ENTER to change text. Use the ENTER key to move the cursor forward, ESC
to move it backwards and <> to select the letter of number. Confirm the text by pressing the ENTER key for a few seconds.
System reset: it resets the system to its original settings. Press ENTER key to confirm.
<
LANGUAGE
>
English
sh
FUNCTIONS
FUNCTION
TIMING ADJ.
TIMING AD
USERS
INFO
- WWW.CAME.IT
ZM3E
7.11 Motor test menu
TEST MOT.: Test to check the proper direction of the gearmotors.
<
LANGUAGE
>
English
sh
FUNCTIONS
FUNCTION
TIMING ADJ.
TIMING AD
USERS
INFO
TEST MOT.
Gate leaf opening run
of the second (M2)
gearmotor. If the
direction is wrong,
invert the motor’s
phases.
Gate leaf opening
run of the first (M1)
gearmotor. If the
direction is wrong,
invert the motor’s
phases.
< TEST MOT. >
<=M1 M2=>
< System Reset >
TEST MOT.
TEST MOT
7.12 Decoding card
Connect the required (R700, AF43S cards) to insert, change, remove and command the operator via transmitter, card or transponder.
Insert the memory roll to save and load all setting including users registered by another card.
AF Card
R700 Card
< No. of Runs >
10
< Standby Msg. >