User guide

X 2
X 2
X 3
X 2
X 4
X 2
X 2
X 2
Pag.
18
18 - Manual code:
319U75
319U75 ver.
2.0
2.0 01/2009 © CAME cancelli automatici s.p.a. - The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.
ENGLISH
<Sensib. Decel.>
-oooooooo+
Sensib. Decel.
<
-oooooooo+
>
Sensib. Decel.
<
-oooooooo+
>
Deceleration sensitivity: it adjusts the obstacle detection sensitivity during opening and closing gate deceleration.
N.B.: this function appears only if the “sensitivity” function is activated in the ENCODER menu.
•
•
•
•
< Slow run Enc >
ON
Slow run Enc
< ON >
Slow run Enc
< OFF >
Encoder Deceleration: this activates the opening and closing deceleration starting points.
< M1 Slow.AP.% >
10
M1 Slow.AP.%
< 10 >
M1 Slow.AP.%
< 11 >
M1 opening deceleration%: this adjusts the (M1) first motor’s deceleration starting point before the opening endpoint.
The deceleration starting point is calculated as a percentage (from 1% to 40% of a full gate run). See illustration on page 28.
N.B.: this function appears only if it is activated in the “decel. Enc” function in the ENCODER menu.
< Sensib. Run >
-oooooooo+
Sensib. Run
<
-oooooooo+
>
Sensib. Run
<
-oooooooo+
>
•
•
•
•
<
LANGUAGE
>
English
English
FUNCTIONS
FUNCTION
TIMING ADJ.
D
T
USERS
ENCODER
<
LANGUAGE
>
EnglishEnglish
FUNCTIONS
FUNCTION
TIMING ADJ.
D
T
USERS
ENCODER
< LANGUAGE >
English
English
FUNCTIONS
FUNCTION
TIMING ADJ.
D
T
USERS
ENCODER
<
LANGUAGE
>
English
sh
FUNCTIONS
FUNCTION
TIMING ADJ.
D
T
USERS
ENCODER
Gate operation sensitivity: this adjusts the obstacle detection sensitivity during opening and closing gate operation.
N.B.: this function appears only if the “sensitivity” function is activated in the ENCODER menu.
< Sen sibility >
Turn o n
Sensibility
< Turn on >
Sensibility
<Disabled>
7.7 Encoder Menu (the ENCODER menu, appears only if selected from the “Config.” function in the FUNCTIONS menu.)
Sensitivity: the obstacle detection function is activated during gate operation and deceleration.
N.B.: before setting the functions in the encoder menu, run the gearmotor checks to verify the proper turning direction.
<
LANGUAGE
>
English
English
FUNCTIONS
FUNCTION
TIMING ADJ.
T
D
ENCODER