User guide

X 2
X 2
X 4
X 2
X 5
X 2
X 3
X 2
Pag.
13
13 -
Manual code
:
319U75
319U75
ver.
2.0
2.0
01/2009 © CAME cancelli automatici s.p.a. -
The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.
ENGLISH
<Safety d.Tes t>
Disabled
Safety d.Test
< Disabled >
Safety d.Test
< CX >
Safety d.Test
< CY >
Safety d.Test
< CZ >
Safety d.Test
< CX+CY >
Safety d.Test
< CX+CZ >
Safety d.Test
< CX+CY+CZ >
Obstacle Det.
< Disabled >
<Obstacle Det.>
Disabled
Obstacle Det.
< Turn on >
Obstacle detected: when motor is stopped (gate closed or after a total stop command) it prevents any movement if safety devices,
such as photocells, detect any obstacles.
Safety test: allows the card to check the efficiency of any safety devices (i.e. photocells) after every opening or closing command.
Preflashing
< Disabled >
< Preflashing >
Disabled
Pre-flashing: after an opening or closing command, the flashing light, connected to W-E, starts flashing before the gate begins its run
(to set the time, see “Pre-flashing timing” from the Adjust Timings menu
Ram hit funct.
< Disabled >
<Ram hit funct.>
Disabled
<
LANGUAGE
>
English
sh
FUNCTIONS
TIMING ADJ.
TIMING AD
USERS
INFO
TEST MOT.
TEST MOT
<
LANGUAGE
>
English
English
FUNCTIONS
TIMING ADJ.
T
D
USERS
I
NF
O
<
LANGUAGE
>
English
sh
FUNCTIONS
TIMING ADJ.
TIMING AD
USERS
INFO
TEST MOT.
TEST MOT
<
LANGUAGE >
English
sh
FUNCTIONS
TIMING ADJ.
TIMING AD
USERS
INFO
TEST MOT.
TEST MOT
Ram blow: before any opening run, the gate leaves will press onto the mechanical endstop for a few seconds, to help release the elec-
trolock (to set the time, see “Starting ram timing” in the Adjust Timings menu).