Manual

X 3
X 2
X 4
X 2
X 5
X 2
X 6
X 2
Pag.
20
20 - Manual code:
319U98
319U98 ver.
0.1
0.1 01/2009 © CAME cancelli automatici s.p.a. - The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.
ENGLISH
Encoder Deceleration: this activates the opening and closing deceleration starting points.
M1 opening deceleration%: this adjusts the (M1) first motor’s deceleration starting point before the opening endpoint.
The deceleration starting point is calculated as a percentage (from 1% to 40% of a full gate run). See illustration on page 28.
N.B.: this function appears only if it is activated in the “decel. Enc” function in the ENCODER menu.
M1 closing deceleration%: this adjusts the (M1) first motor’s deceleration starting point before the closing endpoint.
The deceleration starting point is calculated as a percentage (from 1% to 40% of a full gate run). See illustration on page 28.
N.B.: this function appears only if it is activated in the “decel. Enc” function in the ENCODER menu.
M2 opening deceleration%: this adjusts the (M2) second motor’s deceleration starting point before the opening endpoint.
The deceleration starting point is calculated as a percentage (from 1% to 40% of a full gate run). See illustration on page 28.
N.B.: this function appears only if it is activated in the “decel. Enc” function in the ENCODER menu.
< Slow run Enc >
ON
Slow run Enc
< ON >
Slow run Enc
< OFF >
< M1 Slow.AP.% >
10
M1 Slow.AP.%
< 10 >
M1 Slow.AP.%
< 11 >
FUNCTIONS
F
TIMING ADJ.
T
D
USERS
INFO
ENCODER
Imp. Run
n
FUNCTIONS
F
TIMING ADJ.
T
D
USERS
INFO
ENCODER
Imp. Run
n
FUNCTIONS
F
TIMING ADJ.
T
D
USERS
INFO
ENCODER
Imp. Run
n
FUNCTIONS
F
TIMING ADJ.
T
D
USERS
INFO
ENCODER
Imp. Run
n
< M1 Slow.CH % >
10
M1 Slow.CH %
< 10 >
M1 Slow.CH %
< 11 >
< M2 Slow.AP % >
10
M2 Slow.AP %
< 10 >
M2 Slow.AP %
< 11 >