Manual

X 2
X 7
X 2
X 2
X 2
X 2
Pag.
19
19 -
Manual code
:
319U98
319U98
ver.
0.1
0.1 01/2009 © CAME cancelli automatici s.p.a. -
The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.
ENGLISH
< Slow down time >
0s.
Slow down time
< 0s. >
Slow down time
< 1s. >
Deceleration time: gate leaf deceleration time before each endpoint. The time can be set anywhere between 0” to 30”.
N.B.: this function only appears if the decelerations and Fcap-RallCh. are selected.
< LANGUAGE >
ANGUAG
English
Elih
FUNCTIONS
FUNCTIONS
TIMING ADJ.
I
J
USERS
Imp. Run
< Sensib. Run >
-oooooooo+
Sensib. Run
<
-oooooooo+
>
Sensib. Run
<
-oooooooo+
>
Gate operation sensitivity: this adjusts the obstacle detection sensitivity during opening and closing gate operation.
N.B.: this function appears only if the “sensitivity” function is activated in the ENCODER menu.
< Sen sibility >
Turn o n
Sensibility
< Turn on >
Sensibility
<Disabled>
7.7 Encoder Menu (the ENCODER menu, appears only if selected from the “Config.” function in the FUNCTIONS menu.)
Sensitivity: the obstacle detection function is activated during gate operation and deceleration.
N.B.: before setting the functions in the encoder menu, run the gearmotor checks to verify the proper turning direction.
FUNCTIONS
F
TIMING ADJ.
T
D
USERS
INFO
ENCODER
Imp. corsa
I
s
FUNCTIONS
F
TIMING ADJ.
T
D
USERS
INFO
ENCODER
Imp. Run
n
FUNCTIONS
F
TIMING ADJ.
T
D
U
SER
S
INFO
ENCODER
Imp. Run
n
<Sensib. Decel.>
-oooooooo+
Sensib. Decel.
<
-oooooooo+
>
Sensib. Decel.
<
-oooooooo+
>
Deceleration sensitivity: it adjusts the obstacle detection sensitivity during opening and closing gate deceleration.
N.B.: this function appears only if the “sensitivity” function is activated in the ENCODER menu.
Less
sensitive
More
sensitive
Less
sensitive
More
sensitive