Installation Guide

B
A
ø 3,9 x 13
F500
F510
D
C
C
E
E
Pag.
9
-
Manual code
:
119DS56EN
119DS56EN ver.
5
5 01/2015
© CAME S.p.A. -
The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME S.p.A. to notify users.
ENGLISH
5a) - Assemble the articulated arm (A) onto the intermediate bush which is all in one with the ratiomotor shaft;
- using the hardware provided with the unit, install the bracket on the gate;
- make the electrical connection, supply voltage to the ratio-motor during closure and secure the arm with the M6 (B) grub screw;
- fi x the lower cap.
5b) - Assemble the articulated arm (D) onto the intermediate bush which is all in one with the ratiomotor shaft;
- make the electrical connection, supply voltage to the ratio-motor during closure and secure the arm with the M6 (C) grub screws;
- fix the lower cap.