Installation Instructions

- 6 - Mseries
Fig. 2
AL600ULM
Green
Lead
Battery connection (non power limited)
Wire
Strap
(from
Enclosure
to Door)
115VA C
power mains
non-power
limited
Class 1
Divider
NC C NO
DRY OUTPUT
TRIGGER
LED
6 7 8 9 10
POS (+) DC OUTPUT (STANDBY)
NC C NO
POWER FAI L
TRIGGER
1 2 3 4 5
POS (+) DC OUTPUT (ALARM)
NEG1 NEG2 NEG3 NEG4 NEG5
-- DC INPUT +
NEG (-) INPUT POS (+)
DC Outputs to devices
(power limited)
Fire Alarm
Interface
non-power limited
CAUTION: De-energize unit prior to servicing. For continued protection
against risk of electric shock and fire hazard replace fuses with the same type
and rating (see marking on the board). Replace fuse cover before energizing.
Do not expose to rain or moisture.
Power Limited
NC C NO NC C NO
AC FAIL
BAT FAIL
Battery & AC
Supervision Circuit
(power limited)
+ D C ---
BAT FAIL
NC C NO NC C NO
+ BAT ---
DC
24V - OPEN
12V - CLOSED
SW1
AC FAIL
L G N
AC
AC Delay
Switch Detail
OPEN SWITCH
CLOSED SWITCH
12VDC Rechargeable Battery
(optional)
12VDC Rechargeable Battery
(optional)
CAUTION: When power supply board is set for 12VDC use only one (1) 12VDC
stand-by battery.
Keep power limited wiring separate from non-power limited. Use minimum .25" spacing.
Green
Lead
Fig. 2A
Fig. 2B