Installation Instructions

CX-PS13V3

Variable Output Linear Power Supply

Camden CX-PS13V3 is a cost effective

variable output linear power supply. This

unit provides 1 Amp of current with output

voltages ranging from 2 – 24 VDC. 12”

battery leads are provided for connection to

a GELL CELL battery. The CX-PS13V3 will

charge the battery and automatically switch

over in case of an AC power failure. Easily

mounted with the supplied adhesive tape

the CX-

PS13V3 is suitable for electric

strikes and other electrified devices. For

Mag Locks, where UL/ULC Listed power

supply is required, we suggest our CX-

PS10UL/30UL/60UL models.

Specifications

Input Voltage**

6 – 24 VAC depending Output voltage selected

Output Voltage

6, 12, 24 VDC Selectable or 2- 24 VDC if ADJ is selected

Output Protection

PPTC Resettable fuse

Output Power

800mA., 200mA charging current

Ripple

< 40mV.

Efficiency

12VDC = 85%, 24VDC = 90%

Dimensions

2.70” (68.6mm) L x 1.50” (38.1mm) W x H 1.750” (45.5mm) H

** See table on back of page.

PAGE 1
CX-PS13V3 Variable Output Linear Power Supply Installation Instructions Camden CX-PS13V3 is a cost effective variable output linear power supply. This unit provides 1 Amp of current with output voltages ranging from 2 – 24 VDC. 12” battery leads are provided for connection to a GELL CELL battery. The CX-PS13V3 will charge the battery and automatically switch over in case of an AC power failure.
PAGE 2
CX-PS13 V3 Installation Instructions Wiring Diagram Voltage Selection Jumpers Voltage Adjustment Gell Cell Battery Output To Load Input From Transformer Transformer Selection Required Output Voltage Transformer Volts VA 6 VDC 6 – 9 VAC 20 9 VDC 9 – 12 VAC 20 12 VDC 12 – 14 VAC 30 13.8 VDC 14 – 16 VAC 30 18 VDC 18 – 20 VAC 30 24 VDC 24 – 26 VAC 40 5502 Timberlea Blvd., Mississauga, ON Canada L4W 2T7 IMPORTANT Input transformer required. DO NOT connect circuit to the 120 VAC line.