User's Manual
Table Of Contents
- 1 Overview
- 2 Installation, wiring and debugging
- 3 Getting Started
- 4.Basic Functions
- 4.1 Management menu operations
- 4.1.1 Change Admin Password
- 4.1.2 Set or delete Super-open-password
- 4.1.3 Set admin card
- 4.1.4 Delete admin card
- 4.1.5 Set Machine Mode
- 4.1.6 Limits types of reading card
- 4.1.7 Restore to default settings
- 4.1.8 Add User
- 4.1.9 Delete user
- 4.1.10 Set open door methods
- 4.1.11 Set Multi-card to open door
- 4.1.12 Set lock working mode
- 4.1.13 Set Limits User Mode
- 4.1.14 Set Open-time
- 4.1.15 Set notification to close door
- 4.1.16 Set Alarm-time
- 4.1.17 Set Anti-dismantle alarm function
- 4.1.18 Set alarm or doorbell output function
- 4.1.19 Set Anti-crack function
- 4.1.20 Set LED indicator light mode
- 4.1.21 Adjust the brightness of the normally brigh
- 4.1.22 Set key backlit mode
- 4.1.23 Adjust brightness of key backlit
- 4.1.24 Set buzzer mode
- 4.1.25 Adjust key volume
- 4.1.26 Set the # key whether it can be used doorbe
- 4.1.27 Set doorbell key mode
- 4.2.28Set reader output format
- 4.2 Admin card or PIN operation
- 4.3Users operation
- 4.4 Other operations
- 4.5 Operation characteristics in different machine
- 4.1 Management menu operations
- 5 Management menu summary table
- 6 Precautions in use
- 7 Common troubleshooting
- 4 -
1 Overview
1.1 Introduction
This series of products are using the new 32-bit microcontroller ARM core design with powerful functions. They are very
stable and reliable. It’s a new generation of multi-function access controller, include Reader mode, Single-door mode,
Double-doors mode, Interlock mode, Demo mode etc. All of them could be widely used in office buildings, homes, schools,
condominium, apartments, flats, single houses, banks, prisons and other places.
1.2 Function features
Option for 125 KHz’s EM& HID card.
Option for 13.56MHz’s IC&CPU card.
Optional for metal backlit keypad or infrared keypad.
Option for single-door or double-door.
Single-door controller can be set to Reader mode, Interlock mode and demo mode.
Specific reader mode that customer can set output format.
Support Card and PIN, Multi-cards to open the door.
Support Super-open-card and Super-open-password to open door.
Support Add-card, Delete-card, Anti-duress-card, Authorization-card, and Normal-open card operation.
Support admin password card operation, for quick access to the management menu.
The user card capacity up to 20,000, the admin card capacity up to 21.
Support Set-card operation, for quick access to the management menu.
The “#” key can be used as doorbell button.
In Reader mode, the red and green LED indicator can be controlled externally.
Self-adaption infrared Anti-demolition detection technology. Controller can alarm 24/7 and it will not be affected by
visible light interference.
Unlocking signal output by NO, NC, COM relay.
Alarm and doorbell signal output by MOS and it can be the driver of the alarm or the doorbell.