User's Manual
Table Of Contents
- 1 Overview
- 2 Installation, wiring and debugging
- 3 Getting Started
- 4.Basic Functions
- 4.1 Management menu operations
- 4.1.1 Change Admin Password
- 4.1.2 Set or delete Super-open-password
- 4.1.3 Set admin card
- 4.1.4 Delete admin card
- 4.1.5 Set Machine Mode
- 4.1.6 Limits types of reading card
- 4.1.7 Restore to default settings
- 4.1.8 Add User
- 4.1.9 Delete user
- 4.1.10 Set open door methods
- 4.1.11 Set Multi-card to open door
- 4.1.12 Set lock working mode
- 4.1.13 Set Limits User Mode
- 4.1.14 Set Open-time
- 4.1.15 Set notification to close door
- 4.1.16 Set Alarm-time
- 4.1.17 Set Anti-dismantle alarm function
- 4.1.18 Set alarm or doorbell output function
- 4.1.19 Set Anti-crack function
- 4.1.20 Set LED indicator light mode
- 4.1.21 Adjust the brightness of the normally brigh
- 4.1.22 Set key backlit mode
- 4.1.23 Adjust brightness of key backlit
- 4.1.24 Set buzzer mode
- 4.1.25 Adjust key volume
- 4.1.26 Set the # key whether it can be used doorbe
- 4.1.27 Set doorbell key mode
- 4.2.28Set reader output format
- 4.2 Admin card or PIN operation
- 4.3Users operation
- 4.4 Other operations
- 4.5 Operation characteristics in different machine
- 4.1 Management menu operations
- 5 Management menu summary table
- 6 Precautions in use
- 7 Common troubleshooting
- 24 -
only admin card operation in the zone 1, admin card operation in the zone 2 is same.
4.2.1 Set-card operation
The main function of Set-card is to replace the input Admin Password into the management menu operation. It is suitable for
forgetting the Admin Password or frequently entering the management menu operation. Its operation is:
Read Set-card, equivalent to operation: * ( Hold down for more than 2 seconds), (Admin password) #.
Note: After reading Set-card, the indicator lights are red flashing, indicating that the management menu operation mode has
been entered and other operations can be performed.
4.2.2 Add-card operation
Read Add-card, read user card, read user card, .... read Add-card.
Note: Add-card is mainly used for rapid continuously to add the user card, first read Add-card, sound “beep” two short sound,
light is orange, indicate entering the add user card state, second read Add-card, sound “beep” a long sound, light turns red,
indicate exiting add user card state.
4.2.3 Delete-card operation
Read Delete-card, read user card, read user card, .... read Delete-card.
Note: Delete-card is mainly used for rapid continuously to delete the user card, first read Delete-card, sound “beep” two short
sound, light is orange, indicate entering the delete user card state, second read Delete-card, sound “beep” a long sound, light
turns red, indicate exiting delete user card state.
4.2.4 Super-open-card operation
Read Super-open-card.
Note: Super-open-card has the highest open authority, in a variety of way to open the door, or restrict the user to open the
door, the Super-open-card can open the door.
4.2.5 Super-open-password operation
(8 digit Super-open-password) #.
Note: Super-open-password is 8 digits. The Super-open-password must be different in two zones or it can only open the door
in Zone 1. Super-open-password has the highest open authority, in a variety of way to open the door, or restrict the user to
open the door, the Super-open-password can open the door.
4.2.6 Anti-duress-card operation
Read Anti-duress-card.
Note: Anti-duress-card have the same authority with Super-open-password. The only difference is after reading
Anti-duress-card, the door will open while outputting alarm signal.