User's Manual
Table Of Contents
- 1 Overview
- 2 Installation, wiring and debugging
- 3 Getting Started
- 4.Basic Functions
- 4.1 Management menu operations
- 4.1.1 Change Admin Password
- 4.1.2 Set or delete Super-open-password
- 4.1.3 Set admin card
- 4.1.4 Delete admin card
- 4.1.5 Set Machine Mode
- 4.1.6 Limits types of reading card
- 4.1.7 Restore to default settings
- 4.1.8 Add User
- 4.1.9 Delete user
- 4.1.10 Set open door methods
- 4.1.11 Set Multi-card to open door
- 4.1.12 Set lock working mode
- 4.1.13 Set Limits User Mode
- 4.1.14 Set Open-time
- 4.1.15 Set notification to close door
- 4.1.16 Set Alarm-time
- 4.1.17 Set Anti-dismantle alarm function
- 4.1.18 Set alarm or doorbell output function
- 4.1.19 Set Anti-crack function
- 4.1.20 Set LED indicator light mode
- 4.1.21 Adjust the brightness of the normally brigh
- 4.1.22 Set key backlit mode
- 4.1.23 Adjust brightness of key backlit
- 4.1.24 Set buzzer mode
- 4.1.25 Adjust key volume
- 4.1.26 Set the # key whether it can be used doorbe
- 4.1.27 Set doorbell key mode
- 4.2.28Set reader output format
- 4.2 Admin card or PIN operation
- 4.3Users operation
- 4.4 Other operations
- 4.5 Operation characteristics in different machine
- 4.1 Management menu operations
- 5 Management menu summary table
- 6 Precautions in use
- 7 Common troubleshooting
- 21 -
4.1.22 Set key backlit mode
52, 0#, Normal-off mode for key backlit.
52, 1#, default value, Normal-on mode for key backlit.
52, (2-99) #, Automatic mode for key backlit, turn to micro light over 2-99s.
4.1.23 Adjust brightness of key backlit
53, 1, 1, ... , decrease brightness
53, 2, 2, ... , increase brightness
Note: The brightness of the key backlight can be adjusted at 21 levels. Each time you press the 1 key, decrease 1level of
brightness, press the 1 keys do not move quickly and automatically decrease the brightness, when it has been adjusted to a
minimum brightness, "beep" two tips, each time you press the 2 key, increase 1 level of brightness, press the 2 keys do not
move quickly and automatically increase the brightness, when it have been adjusted to the maximum brightness, "beep" two
tips.
4.1.24 Set buzzer mode
54, 0#, disable buzzer.
54, 1#, default value, enable buzzer.
Note: Enable or disable buzzer only concern normal users operation, such as the sound of opening door by PINs or
read cards. When you press the * key for 2 seconds, the buzzer is forced to enable, such as entering the management menu
or change the user PIN state. In addition, the alarm tone is not controlled by the setting, and the buzzer can still send an
alarm tone when the buzzer disable.
4.1.25 Adjust key volume
55, 1, 1, ... , decrease volume.
55, 2, 2, ... , increase volume.
Note: The key volume can be adjusted at 15 levels. Each time you press the 1 key, decrease 1level of volume, press the 1
keys do not move quickly and automatically decrease the volume, when it has been adjusted to a minimum volume, "beep"
two tips, each time you press the 2 key, increase 1 level of volume, press the 2 keys do not move quickly and automatically
increase the volume, when it have been adjusted to the maximum volume, "beep" two tips.
4.1.26 Set the # key whether it can be used doorbell key
56. 0#, default value, the # key can’t be used as doorbell key.
56, 1#, the # key can be used as doorbell key
Note: When the # key is used as doorbell key, if the # key is the first key, then it is doorbell function, If the # key is after the
digital key, then it is confirm function.