User's Manual

- 18 -
11, (ID) # 10# (10-digit format card number) #, (ID) # 10# (10-digit format card number) #, …
Specified ID number and input 4-6 digits PIN to add user:
11, (ID) # (User PIN) #, (ID) # (User PIN) #, …
Note: ID number are 1~5 digits between 1~20000, User PIN in zone 1 are any 4~6 digits, except 1234, User PIN in zone 2
are any 7 digits.
4.1.8.3 Specify first ID number to add serial number card users
Add 8-digit format serial number card users:
12, (ID) #, 8# (8-digit format card number) #, (card quantity) #
Add 10-digit format serial number card users:
12, (ID) #, 10# (10-digit format card number) #, (card quantity) #
Note: ID number are 1~5 digits, the range is1-20000, ID number plus card quantity must be less or equal to 20001. After add
serial number cards, the first card will be based on ID number and card number, each time add one card, ID number and card
number will add 1 at the same time till to all card is added. In order to prevent duplication of card numbers, please delete all
user cards and admin cards before add serial number cards.
4.1.9 Delete user
Delete all users in Zone 1 and Zone 2:
20, 0000#
Delete user card by read card:
21, read card, read card, …
Delete user by input 8-digit format card number:
21, 8# (8-digit format number) #, 8# (8-digit format number) #, …
Delete user by input 10-digit format card number:
21, 10# (10-digit format number) #, 10# (10-digit format number) #, …
Delete user by input ID number
22, (ID) #, (ID number) #, …
4.1.10 Set open door methods
30, 0#, open door by card, you can open door by user card, but cannot open door by user PIN.
30, 1#, open door by card + PIN, read user card first, then input user PIN to open door.
30, 2#, default value, open door by cards or PIN, read user card or input user PIN to open door.
Note: Super-open-card or Super-open-password is not affected by any open door method; you can open door at any time.
4.1.11 Set Multi-card to open door
31, 1#, default value, read 1 card to open door.
31, (2-10)#, read 2~10 cards in turn to open door(The open door method must set to: open door by card).