User guide

24
Universal RAI Series Gas Blowers Parts List
6” Gear Diameter
(Refer to drawing #T3011023)
Item # Part Name Qty.
*DE cover gasket is not the same as the gasket used on the
GE. You must specify the gasket required when ordering.
**Quantities vary by blower.
Universal RAI Series Gas Blowers Parts List
3-1/2” & 5” Gear Diameter
(Refer to drawing #T30099023)
1 Headplate Gear End 1
2 Headplate Drive End 1
3 Gearbox 1
4 Timing Gears 2
5 Cover-Blind (Plug Opening) 1
7 Gasket, Gear Box 1
11 Cylinder 1
12 Impeller & Shaft Drive 1
13 Impeller & Shaft Driven 1
14 Bearing, Ball 3
15 Bearing, Roller 1
16 Pin, Dowel 4
17 Gear Nut 2
19 Key 1
21 Plug, Pipe 3
23 Screw Hex 8
25 Breather (Plug Vent) 1
26 Screw, Hex 14*
27 Seal, Bearing 4
31 Screw, Hex 4
32 Screw, Hex 4
33 Seal Lip-Drive 1
34 Clamp Plate 2
35 Foot 2
37 Fitting, Grease 2
38 Fitting, Relief 2
39 Washer Mounting 4
40 Screw Socket 2
42 Screw Hex 2
Item # Part Name Qty.
*Quantities vary by blower.
Specified Lubricants
ROOTS Synthetic Oil: ISO-VG-220 Grade
Part Number
Quart 813-106-001
Gallon 813-106-002
Case (12 qts) 813-106-008
ROOTS Synthetic Oil: ISO-VG-320 Grade
Part Number
Quart 813-106-004
Gallon 813-106-005
Case (12 qts) 813-106-007
ROOTS Synthetic Grease: NLGI #2
Part Number
14.5 oz. Tube T200019-001
5 Gallon Pail T200019-003
Case (30 tubes) T200019-002
1 Headplate Gear End 1
2 Headplate Drive End 1
3 Gearbox 1
4 Timing Gears 2
5 Cover-Blind (Plug Opening) 1
7 Gasket, Gear Box 1
7* Gasket DE Cover 1
11 Cylinder 1
12 Impeller & Shaft Drive 1
13 Impeller & Shaft Driven 1
14 Bearing, Ball 3
15 Bearing, Roller 1
16 Pin, Dowel 4
17 Gear Nut 2
19 Key 1
21 Plug, Pipe 3
23 Screw Hex Nylock 8
25 Breather (Plug Vent) 1
26 Screw, Hex 14**
27 Seal, Bearing 4
31 Screw, Hex 4
32 Screw, Hex 10
33 Seal Lip-Drive 1
34 Clamp Plate 2
35 Foot 2
37 Fitting, Grease 2
38 Fitting, Relief 2
39 Washer Mounting 4
40 Screw Socket 2
42 Screw Hex 2
43 Plug 8
53 Oil Sight Glass 2