Instruction Manual

CAMCORP, INC.
Phone: [phone] Fax: [phone]
www.camcorpinc.com
01(- - 21.3+24
Accessory Parts
• This includes all gauges, nylon or copper tubing, valves, gaskets and
other parts not specifically called out.
• These items should be stored inside a cool dry place protected from
moisture, insects, and rodents.
Fan and Fan Accessories
• Fans can be stored outside on a pallet or skid to keep them out of water
and dirt.
• Fan silencers, outlet dampers, and inlet boxes should also be tarped and
stored on a pallet or skid.
• Reference fan IOM manual for long-term storage.
Ducting
• Ducting can be stored outside on a pallet or skid to keep it off the ground.
It should be positioned so that water does not sit on or in the ducting.
• If ducting is unpainted carbon steel it should be at least primed coated
before storage.
• If ducting is already finish coated, it should be tarped to protect the finish,
but this is not absolutely necessary.
Knife Gate
• All limit switches, solenoids, and air cylinder ports must be capped and
taped to prevent any moisture or dirt from entering.
• Equipment can sit outside provided it is covered with a tarp and is on a
pallet or skid to keep it out of water and dirt.
• Reference knife gate IOM manual for long-term storage.
2-3