User Manual

21
©2002 Dresser, Inc. all rights reserved.
ROOTS, RAM, URAI and WHISPAIR are trademarks of Dresser, Inc.
Dresser Design and Universal RAI are registered trademarks of Dresser, Inc.
BLOWER ORIENTATION CONVERSION - WHISPAIR
™
UNITS
TOP DRV, L.S. DISCH
INLET
DISCH
L.H. DRV, BTM DISCH
INLET
DISCH
INLET
DISCH
DISCH
INLET
CW
TOP DRV, R.S. DISCH
R.H. DRV, TOP DISCH
CCW
CCW
CW
DISCH
INLET
CCW
INLET
DISCH
R.H. DRV, BTM DISCH L.H. DRV, TOP DISCH
DISCH
INLET
CW
BTM DRV, R.S. DISCH BTM DRV, L.S. DISCH
1. STANDARD ARRANGEMENT ( 3-WAY UNIVERSAL)
EXTERNAL SIGHT GLASSES (37) & BREATHERS (21) MUST BE RELOCATED AS SHOWN.
FEET (76&77) & LIFTING LUGS (63) MUST BE RELOCATED AS SHOWN.
CCW
DISCH
INLET
CW
3. BOTTOM DRIVE SHAFT ARRANGEMENT "SPECIAL ORDER" (3-WAY UNIVERSAL)
SPECIAL OGE OIL SLINGER REQUIRED FOR ASSEMBLY.
MAY BE CONVERTED TO HORIZONTAL CONFIGURATION AS PREVIOUSLY SHOWN.
2. NON-STANDARD ARRANGEMENT ( 3-WAY UNIVERSAL)
CYLINDER (11) MUST BE UNBOLTED FROM HEADPLATES (1) AND DISCHARGE
RELOCATED AS SHOWN.
MUST HAVE AUTHORIZATION FOR CONVERSION
SO NOT TO VOID WARRANTY.
EXTERNAL SIGHT GLASSES (37) & BREATHERS (21) MUST BE RELOCATED ALSO.
FEET (76&77) & LIFTING LUGS (63) MUST BE RELOCATED AS SHOWN
FIGURE 5