User Manual

VORTEX

SILVER SERIES

USER MANUAL

VORTEX SILVER SERIES V8

P.23

4.10 Filter Cleaning

The air intake on the front of your V8 amplifier is fitted with a removable fil-

ter system. If the filter becomes clogged, the unit will not cool as efficiently

as it should and may result in reduced output levels.

V8 Filter Assembly

1 Clip Aperture

2 Injection Molded Cradle

3 Foam Filter

4 Injection Molded Surround

5 Injection Molded CAMCO Badge

For changing the filter, no tools are required: first, gently slide the whole

plastic filter assembly a few millimeters to the left and lift it from the front

panel. Next, beginning on one of the long sides, carefully unclip the mold-

ed surround (4) from the cradle (2) and then carefully pull the CAMCO

badge (5) out of the four fastening holes with both hands. Remove the

foam filter (3) and clean it with a mild dishwashing detergent and warm

water. Once dry, replace the foam filter carefully into the cradle and repeat

the dismantling procedure in reverse. Insert the five pins on the filter frame

into the clip apertures (1) and slide the filter carefully to the right to secure.

4 OPERATION