Instructions / Assembly

8
ASSEMBLY INSTRUCTIONS
Hardware Used
5
6
5. Assebmle the flame screen to the upper
support.
Secure the flame screen to the upper support
using 8pcs 3/16
” screw.
6. Assemble the reflector onto the flame
screen.
Screw the 3pcs stud on the flame screen,
put 3pcs Φ6 washer onto the top of stud,
then put the reflector onto the stud, secure
them with 3pcs Φ6 washer and 3pcs wing
nut.
AA
BB
CC
B
DD
x 3
x 3
x 6
Hardware Used
DD
KK
x 8
Philips
screwdriver
3/16” Screw
x 1
AA
BB
Wing nut
Washer Φ6
CC
Stud