Instructions / Assembly

13
BATTERIES
Make sure the control knob is in the "OFF" position. Unscrew the push
button cap on the ignition module located on the control panel to access
the battery compartment. The ignition module requires one Alkaline AA
size battery (1.5V). The negative (-) end goes in first. See Figure 15.
Dispose of battery safely. May explode or leak if charged or disposed of
in fire. Make sure of the polarity. Mercury and cadmium free.
F
igure 15
CAUTIONS: BATTERY INSTRUCTIONS
●Always purchase the correct size and grade of battery most suitable for the intended use.
●Always replace the whole set of batteries at one time, taking care not to mix old and new ones, or batteries of different types.
●Clean the battery contacts and also those of the device prior to battery installation.
●Ensure the batteries are installed correctly with regard to polarity (+ and -).
●Remove batteries from equipment which is not to be used for an extended period of time.
●Remove used batteries promptly.
For recycling and disposal of batteries to protect the environment, please check the internet or your local phone directory for
local recycling centers and / or follow local government regulations.
LIGHTING INSTRUCTIONS
Warning: If these instructions are not followed exactly, a fire or explosion may result causing
property damage, personal injury or loss of life.
1. Open the tank drawer and find the control panel on the left. Make sure the control knob is in
the "OFF" position. See Figure 16. Open the tank valve all the way.
IGNITER BUTTON CONTROL KNOB
Figure 16