Manualshelf

Instructions / Assembly

ManualsBrandsCambridge ManualsFire Pit SetsConcord 5-Piece Aluminum Outdoor Conversation Set with Tan Cushions and Cast-Top Fire Pit Table
9101112131415161718
8
5. Put the door onto the bottom connector by guiding the pin on the bottom connector into the
hole under the door. Guide the pin on the top connector into the hole in the top side of the door.
Use a 1/4"x15 mm bolt and washer to secure the top connector to the right side panel as shown
in Figure 5. Do not over tighten.
Figure 5
6. With the help of another person, carefully place the table top onto the firepit base. After
making any necessary adjustments to the alignment of the table top and the assembled
base, use four 1/4"x20 mm bolts and Ø18xØ6.5x1.5 mm washers as shown in Figure 6.
Guide the bolts through the holes in the base, into the pre drilled holes in the table top. Do
not tighten completely.
Figure 6
7. Attach the LP support the to door panel by using four 1/4"x20 mm bolts and Ø6.5x1.0 mm
washers as shown in Figure 7. Do not over tighten.
Figure 7