Operation Manual

751R V2azur
9
ENGLISH
Zone 2 remote control
The Zone 2 remote only affects the Zone two outputs. It has no affect on the
operation of the main zone.
Volume
Use to increase/decrease the level of
sound in Zone 2.
Standby
Switches Zone 2 between Standby
mode and On.
Skip
Skips up or down the tuner presets
that have been set.
Mute
Mutes the audio output in Zone 2.
Press again to cancel mute.
Sources
Press the corresponding button
to change the source for Zone 2.
Pressing the Tuner AM/FM button a
second time toggles between AM and
FM modes.
Zone 2 is analogue by nature and
only sources with audio/video
connections (as well as digital ones)
can be used in Zone 2.
Note: It is not possible to directly
select TV/ARC or USB in Zone 2 as
these are digital only sources.
Follow Main
Sends an Analogue 2 Channel down-mix (L+C, R+C) of the source selected
in the Main Zone to Zone 2.
This is useful if you want to listen to the same thing in both Zones (for a party
perhaps) or wish to hear digital or surround sources in Zone 2 which cannot
be directly selected by Zone 2.
Because the downmix is created from the main zones decoded output any
source selected in the main zone including those connected by digital (opto/
coax) and HDMI inputs can be sent to Zone 2 in this way.
Zone 2 Remote
Tuner
AM/FM
BD
DVD
Vid 3
MP3
Video 1
Aux
Video 2
Exp
Follow
Main
Rec 1
Rec 2
CD