Operation Manual

14
If it is desired to connect external power ampliers, use Phono/RCA leads
connected to the 7.1 Preamp Outputs on the rear panel.
For 5.1/7.1 use set the 'Multi Ch.Out' setting in the 'Advanced Audio Setup'
OSD menu to 'Pre Out' rather than 'Normal'. This mutes all the internal power
ampliers as they are not being used.
Alternatively the 751R V2 features an External 2-Channel mode. This
allows the 751R V2 to reproduce all the surround channels of suitable
source material (Centre, Surrounds and Sub) whilst the Left and Right
Front speakers are driven by an external power amplier or other amplier
capable of supporting xed level inputs (e.g. Cambridge Audio's own 8 series
ampliers).
Set the 'Multi Ch.Out' to 'Ext 2ch' in the OSD to mute the 751R V2's own front
left and right amplier outputs only:
Power amplier/s
Surround back left
Surround left
Left
Right
Surround right
Surround back right
Centre
Phono cables
(2RCA-2RCA)
Front input connections
The front panel Video 3/MP3 input is for temporary connections to video
games consoles etc. Remove the cap to access the Video 3 inputs and
connect to a video game console or video camera's outputs using stereo
phono cables (RCA-RCA) and a Composite video cable. Alternatively, use the
3.5mm mini-jack MP3 socket for the headphone/line outputs of portable
MP3 players.
FM aerial
Connect an aerial to the FM 75 ohm socket (a simple wire aerial is supplied
only for temporary use). Extend the lead and move the aerial around until you
get the best reception. For continued use, we strongly recommended using
a 75ohm outdoor FM aerial.
AM loop aerial
Connect each end of the single length antenna to the antenna terminals.
Place the antenna as far from the main system as possible to prevent
unwanted noise and to obtain optimum reception. If the AM loop aerial
provided does not receive sufcient reception, it may be necessary to use
an outdoor AM aerial.
Aerial connections
FM aerial
FM external
aerial
AM external
aerial
AM loop
aerial
OR
OR
Ground
(optional)
7.1 preamp out
Advanced Audio Setup
Multi Ch.Out :
HDMI Bypass :
TV ARC(HDMIA) :
Return I/O
Ext 2ch
Normal
Enable
L
SR
Amplier
751R V2
R
SL
C
SBR
Sub
L
R
SBL
azur 751R
AV Receiver
Volume
Phones Tuning Mode / Store
BD / DVDUSB Video 1
Stereo
Modes
Pic.
Adj.
Surround
Modes
Zone
2
Audio Video S-Video
Audio
Input Type
Video 2 Recorder 1 Aux / TV CD Recorder 2
Video 3 / MP3
– +Standby / On
7.1 Direct
Analog
Stereo Direct
Optical MP3 InHDMI L R
Mute /
Info
Digitally Processed Modes
Audio Video S-Video
Video 3 / MP3
OpticalHDMI L R MP3 In
Video games console/
Video camera outputs
HDMI cable
Composite video cable
S-Video cable
Toslink cable
Stereo phono cable (RCA-RCA)
OR
MP3
Player
Note: The Left front input is also used for the supplied auto setup microphone.
Refer to the 'Auto setup' section of this manual for more information.
To use HDMI rst assign the HDMI input to the Video 3 source via the On
Screen Display (see later section). The front HDMI input is a HDMI 1.3c
standard. This front HDMI is not 4K compatible. See later section for details.
Advanced Audio Setup
Multi Ch.Out :
HDMI Bypass :
TV ARC(HDMIA) :
Pre Out
Normal
Enable
Return I/O
Subwoofer
Examples
Examples
Examples
Examples