User's Manual

BC01-um-001c Page 11 of 26
6 INSTALLING THE BLUECHAT APPLICATION
The BlueChat Application allows the user to issue commands via the RS232 port of a
PC running under Windows™98 or Windows™ NT to the Development system
units. The software must be installed from the CSR CASIRA Bluetooth Development
kit CDROM provided.
System Requirements for the BlueChat Application
- Pentium processor-based personal computer
- Microsoft Windows™98 or Windows™ NT v4.0(service pack 3 or later)
- 16 MB of RAM (24 MB recommended)
- 10 MB of available hard disk space
Installation instructions:
1 Insert the CASIRA Bluetooth Development kit CDROM into your CDROM
drive.
2 From your CDROM in the “software\host\BlueChat”folder run the file
“install.exe” and change the path if required, Click “unzip”, Click “OK”
and finally Click “CLOSE” to complete the installation.
3 From your “BlueChat” folder create a shortcut for BlueChat.exe and place
it on your desktop or taskbar for convenience as required.
BlueChat should now be installed and ready for use.