Specifications
OR you can leave a drop hanging at
the tip. When the drop of blood
symbol flashes, hold the drop close
to the edge of the test strip and allow
the sample to wick automatically into
the test zone. When the test zone is
full, the meter will beep (if enabled)
and then count down in seconds 10,
9, 8ā¦2, 1 on the display.
STEP 3
Read Result
After 10 seconds, the meter will beep
again (if enabled) and display the
test result. Compare the result with
the ranges of expected results
shown on the test strip vial.
STEP 4
Mark Result
The result can be marked as Control
Solution-Result āCā by pressing the
C Button 2 times. Pressing the C
Button a third time will remove the
marking. Marked control solution
tests will not be included in your
14-day average.
11