ASSEMBLY INSTRUCTIONS SHOWER IT-590073 CUSTOMER SERVICE INFORMATION Please do not return to the store. If any pieces are missing call our toll free number at 1-888-287-4275 from 9:00 am to 5.00 pm CST (Monday to Friday) for replacement parts. For faster service, have the style number handy when calling.
GENERAL INFORMATION & TIPS 1. Please read the assembly instructions prior to assembling the shower. 2. To avoid damage, assemble the shower on a non-abrasive surface such as carpet. 3. Make sure all bolts tightly fastened before the shower is used. 4. This shower is not for commercial use. Please make sure you have all parts before beginning assembly. Please wait until all steps are completed before tightening bolts. 1. Phillips screwdriver is necessary for assembly. == It's not included in hardware list.
SHOWER COMPONENT LIST M1. Shower Head M2. Curved Rod M3. Straight Rod M4. Shower Knob QTY: 1 pc QTY: 1 pc QTY: 1pc QTY:1pc M5. Pipe M6. Nut M7. White Plastic Ring |M8. Black Rubber Ring| QTY: 1pc QTY: 1 pc QTY: 1pc QTY: 2 pcs Q. Black Rubber Washer | R. @2mm Allen Wrench | S.
STEP 1 Attach dowel (E) into right leg frame (A1). Next, Right leg frame (A1) eft leg frame (A2) into vertical frame (B) Secure using 1* bolt (G). Tighten all bolts completely using screwdriver. STEP 2 |Attach adjustable frame (D) and base frame (C) into assembly. 'Secure using wing obit (1) and 1 1/4" bot (F) Tighten all bolts completely using screwdriver. STEP 3 Attach soap dish (K) into assembly.
STEP 5 SEALER TAPE M2 M1 YOU HAVE TO ADJUST SEALER TO THE END OF PIPE (M2) TO TAPPING IN M1 180° POSITION TO OTHER COMPONENT SEALER TAPE
STEP 6 NUT q WHITE PLASTIC RING — {53 BLACK RUBBER RING STEP : 1. FIRST, INSERT THE PIPE HOLDER INTO PIPE . ), BLACK RUBBER NUT PLASTIC | WASHER SEALER TAPE | PIPE SHOWER KNOB | PIPE HOLDER M5 FOLLOW THE NEXT STEP TO ASSEMBLING THE OTHER PARTS OF HARDWARE AS DIAGRAM SHOWN. 2. SECURE THE PIPE HOLDER INTO ADJUSTABLE FRAME (D ) USING 8x16"” SCREWS (L ) AS SHOWN. 3. SCREW PIPE SHOWER (2 ) INTO SPIGOT (1).
