ASSEMBLY INSTRUCTIONS TEAK ROCKING CHAIR IT-130818TH CUSTOMER SERVICE INFORMATION Please email us at for assembly tips, report damage, or request parts. For faster response, please write down item number, code for missing parts, attach the purchase receipt and picture of damaged parts. Toll free number : 1-888-287-4275 from 9:00am to 5.00pm CST (Monday to Friday).
GENERAL INFORMATION & TIPS 1. Please read the assembly instructions prior to assembling the Rocking chair. 2. To avoid damage, assemble the rocking chair on a non-abrasive surface such as carpet. 3. Make sure all bolts tightly fastened before the rocking chair is used. 4. This rocking chair is not for commercial use. Please make sure you have all parts before beginning assembly. Please wait until all steps are completed before tightening bolts. TOOLS REQUIRED 1. 8" Philips screwdriver (Not provided).
PARTS AND HARDWARE LIST K. 1 1/4" Screw L. Glue M.
STEP 1 Attached each rocker (E)} to right and left side frame picture shown, connecting front of rocker to front legs first then the back of rockers. Secure connections with 1 3/4" Bolts (I). Install Seat (B), back support (C), and Apron (D) into corresponding holes of right side frame (A1). Attach the left side frame (A2) onto seat (B), back support (C), and apron {D). Secure left side frame (A2) using 1 1/4" bolts (H), as shown. STEP 3 Invert the chair and repeat step 2 procedure to secure frame.
STEP 5 STEP 6 Insert four 1 3/4" Screws (J) from underneath arms | Attached Support (G) to right and left side frame (A1 & {F1&F2). Tighten screws using Philip screwdriver. A2), secure using 1 1/4" screws (K) as shown. STEP 7 Make sure all parts are connected and tighten all bolts and screws completely using screwdriver. Tap in the wooden caps (M) to cover bolts head using rubber mallet. CONGRATULATION ! THE ROCKING CHAIR IS NOW READY FOR USE.
CARE MAINTENANCE Due to teak wood's natural characteristics, wood color and grain variations may be present. This is a symbol of the originality of each unit and gives each finished piece a distinctive look and inherent charm. UNFINISHED NATURAL TEAK WOOD Teak Wood, when left bare and unfinished, will naturally fade to a silver-gray color. This transformation does not in any way affect the functionality and durability of the furniture.
1 Year Limited Warranty This warranty is a limited warranty. Regular care and maintenance are required to maintain the warranty. Warranty is to the original purchaser when items are purchased from one of our authorized retailers and is not transferable. If a product fails and is under the terms of our limited warranty, the item will be replaced with a small fee when applicable. In the case of discontinued models, an item of similar quality and style will be offered to the customer.
