ASSEMBLY INSTRUCTIONS SWING IT-130914 CUSTOMER SERVICE INFORMATION Please email us at for assembly tips, report damage, or request parts. For faster response, please write down item number, code for missing parts, attach the purchase receipt and picture of damaged parts.
GENERAL INFORMATION & TIPS 1. Please read the assembly instructions prior to assembling the Swing. 2. To avoid damage, assemble the swing on a non-abrasive surface such as carpet. 3. Make sure all bolts tightly fastened before the swing is used. 4. This swing is not for commercial use. Please make sure you have all parts before beginning assembly. Please wait until all steps are completed before tightening bolts. TOOLS REQUIRED 1. 8" Philips screwdriver (Not provided). ~ For tightening all bolts and screws.
STEP 1 Install on level ground. Attach the right side frame (Al) into back support (D). Secure with 27 bolts (E}. Do not tighten the bolts yet. STEP 2 FRONT Next, attach the seat (C) into prevailed holes of back support (B}. STEP 3 Attach the front apron (1) into seat (C) and right side frame {A1). Secure using 2" bolt (E}. Next, attach the left side frame (A2} into back support (B) and front apron (I). Secure using 2" bolts (E).
STEP 5 Secure the hanger bolts with chain (H) into prevailed holes of the right side frame (Al) using washers {J), nuts (K), and head nuts (L) as shown. (The hanger bolts with long chain must be install in front). Repeat the same procedure to install the hanger bolts {H) into the left side frame (A2). make sure all parts are correctly connected and tighten all nuts completely using wrench.
MAINTENANCE Wood is a living material that continues to respond to climate condition even after being made inch a piece of furniture. After assembly rub the furniture with soft rag to remove any residual dust. Wood is a natural material whose appearance will change when left outdoors. This product has been treated prior to leaving the factory. To clean, use mild soap and warm water.
1 year Limited Warranty The furniture is warranted to be free from defects in material and workmanship of the original product when purchased from one of our authorized dealers. 1f a product fails and is under the terms of our limited warranty, the item will be replaced, usually fora small fee. In the case of discontinued models, an item of similar quality and style will be offered to the customer. ยข | year limited frame warranty Frames are warranted to be free from defects in material and workmanship.
