ASSEMBLY INSTRUCTIONS SWING IT-130228 CUSTOMER SERVICE INFORMATION For faster response, please write down item number, code for missing parts, attach the purchase receipt and picture of damaged parts. Please email us at for assembly tips, report damage, or request parts.
WARNING ! Swing are inherently dangerous for small children, never let small children play around it untended. Do not stand on the swing. STEP 1 Install on level ground. Attach the back support (B) and seat (C) into right and left side frames (A1 & A2). Secure using 1 1/4" bolts (D). as shown. STEP 2 Tighten all bolts completely using screwdriver and tipping in the wooden caps (H). to cover bolts head using rubber mallet.
Secure the hanger bolts with chain (1) into prevailed holes of right side frame (A1), using washers (E), dowel rings (K), nuts (F) and head nuts (G) as shown. (The hanger bolt with long chain must be install in front). Repeat the same procedure to install the hanger bolts (1) into left side frame (A2). Make sure all parts are correctly connected and tighten all nuts completely using wrench.
MAINTENANCE ‘Wood is a living material that continues to respond to climate condition even after being made into a piece of furniture. After assembly rub the furniture with soft rag to remove any residual dust. Wood is a natural material whose appearance will change when left outdoors. This product has been treated prior to leaving the factory. To clean, use mild soap and warm water.
1 year Limited Warranty The furniture is warranted to be free from defects in material and workmanship of the original product when purchased from one of our authorized dealers. If a product fails and is under the terms of our limited warranty, the item will be replaced, usually for a small fee. In the case of discontinued models, an item of similar quality and style will be offered to the customer. e 1 year limited frame warranty Frames are warranted to be free from defects in material and workmanship.
