User Manual

10
Front panel controls
1
Power on/stdby
Switches the unit between on and low power standby where
the DacMagic 100 is off and the PSU draws <0.5W.
2
Source
Press to select between USB, SPDIF 1, SPDIF 2 & Toslink.
The corresponding LED will light up to show which source
has been selected.
48 88.29644.1 192
Standby / On Source
Digital to Analogue Converter
Incoming Sample Rate
Toslink
S/P DIF 1
S/P DIF 2
1 2 3
3
Incoming sample rate
In the presence of an incoming digital stream, the relevant
LED will light up to indicate the incoming digital sampling
frequency (between 44.1kHz and 192kHz). For 32kHz
material, the DacMagic 100 will still operate but no LED
will be lit.