Owner's Manual

7
CXN
Firmware
࠮*OLJRMVY\WKH[LZHUKKPZWSH`]LYZPVUU\TILY
Display brightness
Device name
Rename the CXN.
Audio
࠮+PNP[HSWYLHTWTVKL
On – enables volume control.
 6Ɉ¶Ä_LKV\[W\[
Balance – only available if Digital Pre-amp Mode = On.
࠮<:)H\KPVJSHZZ
1.0 – for greatest compatibility with computers.
¶HSSV^ZOPNOZHTWSLYH[LH\KPV\W[VIP[ R/aZHTWSLYH[L@V\
may need to download and install the Cambridge Audio USB Audio class
2.0 driver.
For further information on USB Audio: www.cambridgeaudio.com/USB-audio.
Remote control
Used when there is a clash with other products.
࠮*?5:LYPLZOHUKZL[KLMH\S[
࠮*?5:LYPLZOHUKZL[¶HS[LYUH[LZL[09YLTV[LJVU[YVSJVTTHUKZ
࠮ 5V 09 JVU[YVS ¶ KPZHISLZ [OL *?5 MYVT YLZWVUKPUN [V 09 YLTV[L JVU[YVS
commands.
To use the alternate set IR remote control commands, both the CXN and the
*?509YLTV[LJVU[YVSOHUKZL[T\Z[ILYLJVUÄN\YLK!
࠮*?5¶ZLSLJ[*?5:LYPLZOHUKZL[PU[OLHIV]LTLU\
࠮9LTV[LJVU[YVS¶WLYMVYT[OLMVSSV^PUNZ[LWZ!
Remove the batteries from the CXN IR remote control.
Press and hold the 'Power' button while reinserting the batteries.
Note: To restore the default CXN IR remote control command set, remove and
reinstall the batteries without pressing any buttons.
Language
Standby Mode
࠮5L[^VYR:[HUKI`¶UL[^VYR JVUULJ[PVUZYLTHPUHJ[P]LHUK[OL*HTIYPKNL
Connect app can turn on the CXN.
࠮,*6TVKL¶HSSH\KPVUL[^VYRHUKJVU[YVSJPYJ\P[ZHYLZO\[KV^U
Automatic Power-down
Sets the time before entering Standby Mode after inactivity.
Edit Input Names
Allows you to customise the names of the digital inputs; USB Audio and D1
– D2.
Factory reset
Restores the CXN to the default factory shipping state.
Note: Factory reset will delete all Wi-Fi networks and keys from memory;
however Presets associated with your Stream Magic website account remain.