Specification Sheet

ePMP™ Bridge-in-a-Box Specification Sheet
Cambium Networks, Ltd.
3800 Golf Road, Suite 360
Rolling Meadows, IL 60008
www.cambiumnetworks.com
Join the conversation: community.cambiumnetworks.com
Bridge-in-a-Box Additional Specifications
Feature
Specification
Spectrum
Frequency Range
4910 – 5970 MHz
Channel Spacing
Configurable on 5 MHz increments
Frequency Range
5 GHz: 4910 – 5970 MHz (exact frequencies as allowed by local regulations)
Channel Width
5 | 10 | 20 | 40 MHz
Physical Layer
2x2 MIMO/OFDM
Ethernet Interface
10/100/1000BaseT, Compatible with Cambium PoE pinouts (V+ = 7 & 8, Return = 4 &
5) and Standard PoE pinouts (V+ = 4 & 5,
Return = 7 & 8)
Protocols Used
IPv4, UDP, TCP, IP, ICMP, SNMPv2c, HTTPs, STP, SSH, IGMP Snooping
Network Management
HTTPs, SNMPv2c, SSH
VLAN
802.1Q with 802.1p priority
Performance
ARQ
Yes
Nominal Receive Sensitivity (w/FEC)
@20MHz Channel
MCS0 = -93 dBm to MCS15 = -72 dBm (per branch)
Nominal Receive Sensitivity (w/FEC)
@40MHz Channel
MCS0 = -90 dBm to MCS15 = -69 dBm (per branch)
Quality of Service
Three level priority (Voice, High, Low) with packet classification by DSCP, COS,
VLAN ID, IP & MAC Address, Broadcast, Multicast and Station Priority
Physical
Transmit Power Range
-17 to +30 dBm (combined, to regional EIRP limit) (1 dB interval)
Surge Suppression
2 Joule Integrated
Weight
0.50 kg (1.1 lb.) (includes mounting bracket)
Wind Survival
145 km/hour (90 mi/hour) with antenna
Dimensions (h x w x d)
12.4 x 25.1 x 11.9 cm (4.9 x 9.9 x 4.7 in) – with mounting bracket attached
Pole Diameter Range
1 – 1.6 in (2.5 – 4.1 cm) with included clamp ; up to 2.25 in (5.7 cm) with larger clamp
Power Consumption
10 W Maximum, 5 W Typical
Input Voltage
10 to 30 V