Spec Sheet
ACCELERATE SPEED AFFORDABLY
Whether you want to replace T1/E1 lines with wireless
broadband, increase throughput for bandwidth-intensive
applications or backhaul voice and video traffic, PTP 200
Series solutions can provide affordable and reliable
communications to support your applications. The systems
communicate effectively in line-of-sight (LOS) and near-line-
of-sight (nLOS) environments and operate in the 4.9, 5.4 and
5.8 GHz radio frequencies (RF) at Ethernet data rates up to
256 Mbps. There are three product platforms within the PTP
200 family of solutions, the PTP 200, PTP 230 and PTP 250.
Platform
1
PTP
Model
RF
Band
Channel
Width
Maximum
Data Rate
200 49200 4.9 GHz 10 MHz 21 Mbps
230
54230
58230
5.4 & 5.8 GHz 20 MHz 50 Mbps
250 5X250
5.4 & 5.8 GHz
Dual Band
20 MHz 112 Mbps
40 MHz 256 Mbps
DUAL-BAND FLEXIBILITY WITH PTP 250
Our PTP 250 solutions are dual-band radios operating in the
5.4 and 5.8 GHz frequencies. A simple configuration change
is all that is needed to change frequencies. With MIMO
(Multiple-Input Multiple-Output), up to 256 Mbps and an
extremely attractive price point, you can supply the high-
throughput needed to support your ever-increasing volume
of multimedia information. Plus, PTP 250 radios can deliver
234,000 packets-per-second (PPS) for best-in-class packet
performance in small-packet applications such as Voice-
over-IP (VoIP). Industry-leading performance and diagnostic
tools help you install and optimize the radios for peak
performance. The systems are available in both Integrated
and Connectorized versions to give you even more flexibility.
• Integrated: With built-in antennas, Integrated models
are ideal for environments where high-throughput and
affordability are major requirements.
• Connectorized: Connectorized models offer you the
high-gain advantage of external antennas, allowing
you to connect over greater distances than with the
Integrated systems.
GREATER RANGE WITH PTP 230
These very affordable systems can help you communicate
reliably over long distances. With a PTP 54230 or PTP 58230
system, you can extend your coverage up to 18 miles (29
km) when configured with a passive LENS or up to 80 miles
(128.7 km) with a reflector.
In addition, these radios are excellent choices when you
need to deploy multiple radios on a tower or rooftop.
Because both the PTP 54230 and PTP 58230 models can
synchronize communications using a GPS timing device,
you can collocate radios while virtually eliminating self-
interference. Synchronization can be achieved by deploying
your PTP 54230 or 58230 system with a compatible Point-
to-Multipoint (PMP) Cluster Management Module (CMM)
or a Universal GPS module. In many cases, sharing tower or
rooftop space can reduce your operating expenses.
PUBLIC SAFETY WITH PTP 49200
Operating in the 4.9 GHz spectrum dedicated to public
safety, PTP 49200 systems give budget-constrained, public
safety officials reliable wireless broadband communications.
In LOS and nLOS environments, these systems deliver up 21
Mbps Ethernet data rates and can span single-hop links of
up to 15 miles (24 km). You can select a PTP 49200 version
with 56-bit DES or 128-bit AES encryption to supply robust
over-the-air security. With Orthogonal Frequency Division
Multiplexing (OFDM) technology, an extremely affordable
investment cost and a low cost of ownership, these
systems offer a superb option to meet rigorous public safety
communication requirements.
UNWAVERING QUALITY
Affordability means nothing if your system is plagued with
operational problems. True value combines affordability
with reliability and high performance. To achieve that, we
put the same quality engineering and attention to detail
into our PTP 200 Series systems as our other PTP and
PMP systems. So, you can be confident that your PTP 200
Series solution will deliver the performance promised. In
addition, our extensive wireless experience and expertise
are available to help you with configuration, training,
maintenance and support services.
FEATURES YOU WANT AT A PRICE YOU NEED
PTP 200 SOLUTIONS
• PTP 200 – 4.9 GHz
• PTP 230 – 5.4 and 5.8 GHz
• PTP 250 – Dual-band 5.4 and
5.8 GHz
1
PTP 200 systems are based on
three separate platforms, and
upgrades are not available from
one platform to another.
PTP 200 BROCHURE – from PTP 250 Release 02-00 – PAGE 2
Your organization may be one of many organizations that find themselves
in a performance-versus-budget quandary. You need high-speed, reliable
communications to support current and future applications but are
restricted by budgetary limitations. We understand your dilemma. So, our
Cambium Point-to-Point (PTP) 200 Series Solutions are designed to give
you high-performance connectivity and backhaul for a remarkably small
investment.