Spec Sheet

PTP 650

Service providers, government public safety agencies, and critical infrastructure operators such

as utilities and energy companies have experienced massive growth in data, voice, and video

traffic over the past few years. This growth has imposed large bandwidth demands for reliable

and secure broadband connectivity and backhaul worldwide.

Cambium Networks disrupts the performance-reliability continuum with the Cambium Point-to-

Point (PTP) 650 Series solution. With up to 450 Mbps aggregate throughput, PTP 650 systems

let you reliably and securely handle today’s needs with scalability to meet future requirements.

FLEXIBLE, SPECTRALLY-EFFICIENT, SELF-OPTIMIZING

SUB-6GHZ SOLUTION

Based on our widely-deployed, field-proven non-line-ofsight (NLOS) technology, PTP 650 wire-

less Ethernet bridges offer an ideal array of features that give you more capacity, greater

operational flexibility, and the highest spectral efficiency in the industry. PTP 650 systems

provide 4.9 to 6.05 GHz, multi-band flexibility in a single radio and operate in channel sizes from

5 to 45 MHz.

SPECIFICATION SHEET: PTP 650

CN PTP650 09172014

With Dynamic Spectrum Optimization (DSO), PTP 650 systems are constantly optimizing the channel of operation to maximize link

reliability and performance. The systems can provide up to 99.999% availability in virtually any environment, including non-line-of-sight,

long-distance line-of-sight, high interference, over water and desert, and through extreme weather conditions. As a result, you can

deliver more throughput with less spectrum and less investment in even the most challenging environments

DESIGNED WITH YOU IN MIND

Whether your organization is an enterprise, government agency, or service provider, PTP 650 systems are ideal solutions for a wide

array of applications such as T1/E1 and fiber replacements or extensions; video surveillance backhaul; LTE, macro-cell, and small-cell

backhaul; lastmile access; disaster recovery; network redundancy; and building-to-building campus connectivity.

FIELD TESTED AND INDUSTRY CERTIFIED

PTP 650 radios meet industry standards with proven compliance to assure you of interoperability, security, and ruggedization.

• FIPS 197 128/256-bit AES encryption

• IEEE 1588v2 and Synchronous Ethernet (SyncE)

• IPv6/IPv4 dual-stack management support

• Ingress Protection rated (IP66/67) protective aluminum radio enclosures

• MEF9 certification

PTP 650 Integrated

PTP 650 Connectorized

PAGE 1
SPECIFICATION SHEET: PTP 650 PTP 650 Service providers, government public safety agencies, and critical infrastructure operators such as utilities and energy companies have experienced massive growth in data, voice, and video traffic over the past few years. This growth has imposed large bandwidth demands for reliable and secure broadband connectivity and backhaul worldwide.
PAGE 2
Specifications SPECIFICATION SHEET: PTP 650 RADIO TECHNOLOGY MODEL PTP 50650 RF BANDS1 Wide-band operation 4.9 to 6.05 GHz (Allowable frequencies and bands are dictated by individual country regulations. The most common bands are listed here.) 4.940 – 4.990 GHZ (Public Safety) 5.15 – 5.25 GHZ 5.25 – 5.35 GHZ 5.470 – 5.725 GHZ 5.725 – 5.850 GHZ 5.825 – 6.
PAGE 3
Specifications SPECIFICATION SHEET: PTP 650 MANAGEMENT & INSTALLATION LED INDICATORS Power status, Ethernet link status, and activity on Extended Range PoE supply NETWORK MANAGEMENT In-band and out-of-band management (OOBM) SYSTEM MANAGEMENT IPv6/IPv4 dual-stack management support Web access via browser using HTTP or HTTPS/TLS3 SNMP v1, v2c and v3, MIB-II and proprietary PTP MIB Cambium Wireless Manager, WM 4.