Spec Sheet

PMP 450m
Access Point SPECIFICATION SHEET
CN PMP 450m AP 07112017
Specifications
INTERFACE
MAC (Media Access Control) Layer Cambium Networks proprietary
Physical Layer
14x14 Multi-User MIMO OFDM
Ethernet Interface 100/1000BaseT, full duplex, rate auto negotiated (802.3 compliant)
Protocols Used IPv4, UDP, TCP, IP, ICMP, Telnet, SNMP, HTTP, FTP
Network Management HTTP, HTTPS, Telnet, FTP, SNMP v3
VLAN 802.1ad (DVLAN Q-inQ), 802.1Q with 802.1p priority, dynamic port VID
PERFORMANCE
Subscriber Per Sector Up to 238
ARQ Yes
Modulation Levels (Adaptive) MCS Signal to Noise Required (SNR, in dB)
2X QPSK 10
4X 16QAM 17
6X 64QAM 24
8X 256QAM 32
Maximum Deployment Range Up to 40 miles (64 km)
Latency
10 ms, typical
GPS Synchronization Yes, via Autosync (CMM5 or UGPS)
Quality of Service
Diffserv QoS
LINK BUDGET
Antenna Beam Width (Azimuth)
90° integrated sector (dual polarity, H+V)
Maximum EIRP
+38 dBm (or up to maximum allowed by regulation)
PHYSICAL
Antenna Connection
Integrated Sector Array
Surge Suppression (with LPU)
EN61000-4-5: 1.2us/50us, 500 V voltage waveform
Recommended external surge suppressor: Cambium Networks Model # C000065L007A
Mean Time Between Failure > 40 Years
Environmental IP67, IP66
Temperature / Humidity -40°C to +60°C (-40°F to +140°F), 0-95% non-condensing
Weight
Integrated
Approx. 14.2 kg (31 bs)
Wind Loading - Front Facing
@ 90 mph / 144 kph 460 N
@ 110 mph / 177 kph 700 N
Dimensions (HxWxD)
Integrated
52 x 65 x 11 cm (20.3” x 25.7” x 4.4”)
Power Consumption
70 W typical, 80 W peak (up to 110 W max with AUX port PoE enabled)
Input Voltage
42.5-59 V DC
Mounting
Pole mount with included brackets
Antenna Beam Width (Elevation)
2° Electrical Downtilt, 8° Elevation (with Null Fill)
Wind Survival
124 mph / 200 kph