User Manual
Table Of Contents
- Cambium
- PMP 450 Planning Guide
- Accuracy
- Copyrights
- Restrictions
- License Agreements
- High Risk Materials
- Safety and regulatory information
- Contents
- List of Figures
- List of Tables
- About This Planning Guide
- PMP support website: http://www.cambiumnetworks.com/support
- Cambium main website: http://www.cambiumnetworks.com/
- Sales enquiries: solutions@cambiumnetworks.com
- Email support: support@cambiumnetworks.com
- Cambium Networks
- 3800 Golf Road, Suite 360
- Rolling Meadows, IL 60008
- Chapter 1: Product description
- Chapter 2: Planning considerations
- Regulatory planning
- Network migration planning
- Site planning
- Link planning
- Analyzing the RF Environment
- Selecting Sites for Network Elements
- Diagramming Network Layouts
- Grounding and lightning protection
- Configuration options for TDD synchronization
- Data network planning
- Security planning
- Isolating APs from the Internet
- Managing module access by passwords
- Filtering protocols and ports
- Port Lockdown
- Isolating SMs
- Filtering management through Ethernet
- Allowing management from only specified IP addresses
- Configuring management IP by DHCP
- Planning for airlink security
- Planning for RF Telnet Access Control
- Planning for RADIUS integration
- Planning for SNMP security
- Ordering components
- Chapter 3: Legal information
- Cambium Networks end user license agreement
- Acceptance of this agreement
- Definitions
- Grant of license
- Conditions of use
- Title and restrictions
- Confidentiality
- Right to use Cambium’s name
- Transfer
- Updates
- Maintenance
- Disclaimer
- Limitation of liability
- U.S. government
- Term of license
- Governing law
- Assignment
- Survival of provisions
- Entire agreement
- Third party software
- Hardware warranty
- Limit of liability
- Cambium Networks end user license agreement
- Chapter 4: Reference information
System management Product description
1-22
pmp-0047 (December 2012)
PMP 450 devices may receive NTP data from a CMM3 or CMM4 module, or from an NTP server configured in the
system’s management network.
The Time Zone option is configurable on the AP’s Time Configuration page, and may be used to offset the received
NTP time to match the operator’s local time zone. When set on the AP, the offset will be set for the entire sector
(SMs will be notified of the current Time Zone upon initial registration). If a Time Zone change is applied, the
SMs will be notified of the change in a best effort fashion, meaning some SMs may not pick up the change until the
next re-registration. Time Zone changes are noted in the Event Log of the AP and SM.
Wireless Manager (WM)
Cambium Networks Wireless Manager 4.0 is recommended for managing PMP 450 networks. You can achieve
better uptime through better visibility of your network with the Cambium Wireless Manager. This network
management software tool offers breakthrough map-based visualization capabilities using embedded Google maps,
and combined with advanced configuration, provisioning, alerting and reporting features you can control your entire
outdoor wireless network including Mesh Wide Area Network, and Point-to-Multipoint and Point-to-Point solutions
as well as other SNMP enabled devices. With its powerful user interface you will not only be able to control your
network's access, distribution and backhaul layers, but you will also have visibility to WLAN sites and be able to
quickly launch indoor network management systems.
Some key features of Wireless Manager are:
• Template-Based Configuration: With Wireless Manager's user-defined templates you can accelerate the
process for the configuration of the devices you add to your network resulting in quicker and easier
deployments. The template-based functionality provides an automated way to configure large numbers of
network devices with just a few mouse clicks, and can be scheduled to occur at any time via Wireless
Manager's Task Scheduler.