User Manual

PMP 450 Planning Guide Compliance with radio regulations
pmp-0047 (December 2012)
4-23
FCC compliance testing
With GPS synchronization installed, the system has been tested for compliance to US (FCC) specifications. It has
been shown to comply with the limits for emitted spurious radiation for a Class B digital device, pursuant to Part 15
of the FCC Rules in the USA. These limits have been designed to provide reasonable protection against harmful
interference. However the equipment can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to other radio communications. There is no guarantee that
interference will not occur in a particular installation.
A Class B Digital Device is a device that is marketed for use in a residential environment, notwithstanding use in
commercial, business and industrial environments.
Notwithstanding that Cambium has designed (and qualified) the PMP 450 products to generally meet the Class B
requirement to minimize the potential for interference, the PMP 450 product range is not marketed for use in a
residential environment.
FCC and ICC IDs and certification numbers
Table 41 US FCC IDs and Industry Canada Certification Numbers and Covered
Configurations
FCC ID Industry
Canada
Cert
Number
Frequencies Module
Families
Antenna
(OFDM)
Maximum
Combined
Tx Output
Power
Z8H89FT0002 109W-0002
20 MHz channels,
centered on 5735-5840 in
5 MHz increments (within
the 5725-5850 MHz ISM
band)
PMP 450 AP
5.8-GHz
17 dBi
Connectorized
19 dBm
10 MHz channels,
centered on 5730-5845 in
5 MHz increments (within
the 5725-5850 MHz ISM
band)